800.331.3118  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Liquid Process Liquid Cartridge Filters Graver Technologies WaterTEC Series Liquid Cartridge Filter

Graver Technologies WaterTEC Series Liquid Cartridge Filter

PART WaterTEC
SUPPLIER ---
SUPPLIER PART # ---
-- Select -- 0.5 0.5 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.45 0.45 0.45 0.45 0.45 0.65 0.5
-- Select -- 20 in. 30 in. 10 in. 20 in. 10 in. 10 in. 20 in. 20 in. 20 in. 20 in. 30 in. 30 in. 40 in. 10 in. 10 in. 20 in. 20 in. 30 in. 20 in. 30 in.
-- Select -- Silicone Silicone Silicone Silicone Silicone Silicone Silicone EPDM Silicone Silicone Silicone Silicone Silicone EPDM Silicone EPDM Silicone EPDM EPDM Silicone
-- Select -- 222-Flat Single Open End 222-Flat Single Open End 222-Flat Single Open End 222-Flat Single Open End Single Open End, Internal O-Ring 222-Flat Single Open End Single Open End, Internal O-Ring 222-Flat Single Open End 222-Flat Single Open End Double Open End 222-Fin Single Open End Double Open End 222-Flat Single Open End Single Open End, Internal O-Ring Single Open End, Internal O-Ring 222-Flat Single Open End Double Open End 222-Fin Single Open End 222-Flat Single Open End 226-Fin Single Open End
-- Select -- Factory Pre Rinse None None None None None None None None None None None None None None None None None None None
Calculating price...
QUANTITY

About this item

WaterTEC™ Series filter cartridges from Graver Technologies feature absolute-rated, hydrophilic TECpore™ polyethersulfone membranes with polypropylene support for cost-effective, high-performance filtration. Available in micron ratings from 0.05 to 0.65 µm and lengths up to 40", these cartridges deliver high dirt holding capacity, low pressure drop, and broad chemical compatibility. Certified to USP Class VI and manufactured with FDA-compliant materials, WaterTEC™ filters are ideal for DI water, aqueous chemical processing, and food and beverage applications—delivered with Total Filtration Services’ trusted support.

  • High dirt holding capacity minimizes change-outs
  • Low pressure drop reduces energy costs
  • Thermal bonded construction — no adhesives
  • Available in all common end configurations
  • Certified for food contact (USP Class VI, FDA, EU regulations)
71403_67a0d96c02bcaee3242c4286_WaterTEC_TECpore_1_25
71403_67a0d96c02bcaee3242c4286_WaterTEC_TECpore_1_25.pdf
Micron Ratings 0.05, 0.1, 0.2, 0.45, 0.65
Media TECpore Asymmetric Polyethersulfone Membrane
Support Layers Spunbonded Polypropylene
Construction All thermal bonded, no adhesives
Materials Polypropylene inner core, end caps, and cage
Gasket/O-Ring Options Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings only), Teflon (gaskets), Viton
Nominal Lengths 5", 9.75", 10", 20", 30", 40"
Outside Diameter 2.7" (6.9 cm)
Inside Diameter 1.0" (2.54 cm)
Surface Area 6.0 ft² (0.56 m²) per 10" element
Max Operating Temp 176°F (80°C) at 20 psid (1.38 bar)
Max Differential Pressure 75 psid @ 70°F (5.2 bar @ 21°C), 30 psid @ 176°F (2.0 bar @ 80°C)
Max Reverse Differential Pressure 40 psid @ 70°F (2.8 bar @ 21°C)
Recommended Change-out Pressure 35 psid (2.4 bar)
Cleaning/Sanitization Compatible with most cleaning agents (pH 1–14)
Steam/Autoclave Compatibility Autoclave: 30 min @ 250°F (121°C), Steam: 10× 30 min @ 275°F (135°C) <= 3 psid
Certifications USP Class VI, FDA Title 21 Compliant, European Regulation 1935/2004 & 10/2011
Typical Applications General water filtration, DI water pre/post filter, Aqueous based chemical processing