800.331.3118  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home product-application Food And Beverage Graver Technologies ZTEC WB Series Beverage Grade Liquid Cartridge Filter

Graver Technologies ZTEC WB Series Beverage Grade Liquid Cartridge Filter

PART ZTEC-WB
SUPPLIER ---
SUPPLIER PART # ---
-- Select -- 0.2 0.45
-- Select -- 20 in. 30 in.
-- Select -- Silicone Silicone
-- Select -- 222-Fin Single Open End 226-Fin Single Open End
Calculating price...
QUANTITY

About this item

ZTEC-WB filters from Graver Technologies feature beverage-grade TECpore™ PES membranes designed to protect product quality and shelf life by removing spoilage organisms in beer, wine, and bottled water. These absolute-rated cartridges (0.2–0.65µm) deliver consistent retention efficiency, high log reduction values, and extended service life. Produced in an ISO Class 7 cleanroom with FDA-compliant materials, ZTEC™ WB filters provide reliable performance, low adsorption of flavor and color compounds, and cost-effective beverage clarification for breweries, wineries, and bottled water producers.

  • Micron ratings: 0.2, 0.45, 0.65 µm with high bacterial log reduction values
  • 7.6 ft² filtration area per 10" cartridge
  • TECpore PES membrane with polypropylene supports and components
  • Tested for retention of P. aeruginosa, L. brevis, and S. cerevisiae
  • Steam and hot DI water sanitizable; 50 cycle durability @ 275°F
  • Multiple lengths and end configurations; embedded O-ring support ring
  • USP Class VI, FDA, and EU food contact compliant
71597_67a0da04f30e6c8e5f19a409_ZTEC_WB_TECpore_1_25
71597_67a0da04f30e6c8e5f19a409_ZTEC_WB_TECpore_1_25.pdf
Product Code ZTEC-WB
Micron Rating 0.2, 0.45, 0.65 µm
Efficiency Bacterial retention (validated); absolute membrane
Length 5", 9.75", 10", 20", 30", 40"
Outside Diameter 2.7" (6.9 cm)
Inside Diameter 1.0" (2.54 cm)
Surface Area 7.6 ft² per 10" element
Filter Media TECpore Asymmetric Polyethersulfone (PES)
Support Layers Spunbonded Polypropylene
Core/End Caps/Cage Polypropylene
O-Ring Materials Buna-N, EPDM, Silicone, Teflon Encapsulated Viton (O-Rings only), Teflon (gaskets), Viton
O-Ring Insert PBT
Max Operating Temp 176°F (80°C) @ 20 psid
Max Differential Pressure 80 psid @ 70°F, 40 psid @ 160°F
Max Reverse Pressure 40 psid @ 70°F
Recommended Change-Out Pressure 35 psid (2.4 bar)
Sanitization Steam/autoclave: 50 cycles @ 275°F (135°C); Hot DI water: 185°F for 30 min
Certifications USP Class VI, FDA CFR Title 21, EU 1935/2004 & 10/2011
Typical Bacterial Retention 0.2 µm 7.6 LRV (Pseudomonas aeruginosa); 0.45 µm 7.52 (Lactobacillus brevis); 0.65 µm 10.9 (S. cerevisiae)
Bubble Point & Air Flow 0.2 µm 26 psig, 35 cc/min @ 21 psig; 0.45 µm 20 psig, 35 cc/min @ 16 psig; 0.65 µm 17 psig, 35 cc/min @ 14 psig